View Single Post
  #23  
Old 21-10-2015, 06:48 PM
Camelopardalis's Avatar
Camelopardalis (Dunk)
Drifting from the pole

Camelopardalis is offline
 
Join Date: Feb 2013
Location: Brisbane
Posts: 5,429
Quote:
Originally Posted by AnakChan View Post
It cools down as per advertised - down to -18C -> -20C. If there's anything I do wish it could go a little cooler. Any other limitations, is with the Sony itself, not the mod CDS did.
A drop of -20C should be sufficient for warm summer evenings, possibly even here in QLD I'd be surprised if your darks from the A7S at 0-5C were anything other than clean, but it'd be interesting to learn otherwise.

Quote:
Originally Posted by glend View Post
Still thinking about whether I need to get CentralDS to put the MC clear glass in front of the sensor (it's an extra $150USD). I have asked Yun Lee about what benefits it brings. I'd appreciate any views here on that as well, given that I will be using screw on narrow band filters in the future, or my Baader IR/UV Cut for straight mono luminance. Other than a level of dust protection for the sensor surface I can't see what it brings if I am running front screw on filters.
If you're going to use it solely for astro, there's no advantage. With OSC DSLR retaining the filters, or at least that mimics the filters, is useful to retain autofocus capability with the camera. This is near useless IMO for a dedicated astro cam. Whether or not dust gets sucked in and lands on the sensor or the glass is largely irrelevant, you'll still want to clean it and/or take good flats.
Reply With Quote