Thread: [SOLD] Saxon AZ-EQ6
View Single Post
  #1  
Old 24-07-2021, 05:11 PM
BeardFace (Nial)
Registered User

BeardFace is offline
 
Join Date: Mar 2020
Location: Melbourne, Australia
Posts: 30
Saxon AZ-EQ6

Hey all,

I'm continuing the sell off of equipment so I can save up for a new mount, next up is my Saxon AZ-EQ6. Bought just over a year ago it's been an amazing mount and would guide consistently well. I've never had to adjust the worms or anything else, it just worked right out of the box. It's also one of the new versions with the built in USB port. Everything that's included:

-Mount head and tripod
-4x 5kg counterweights
-Extra saddle for use in AZ mode
-Extension bar
-Shutter cable
-Hand controller
-12v power supply
-SynScan USB Adapter for EQMod

Some notes:

-The Saxon and Skywatcher AZ-EQ6 are the exact same units, just with different paint jobs
-This handled an RC8 at 1600mm with sub arc-second guiding
-Handled a 12inch newt in AZ with no problems
-I've converted the power cable to take a 5.1mm jack like most astro gear
-One of the counterweights didn't arrive with the standard bolt, so I've improvised with a shorter bolt holding in another bolt. It works, but might want to get a proper one at some point.

All up I'm asking for $2200. Pickup in Brunswick, VIC (after lockdown of course), or can post at buyer's expense (keep in mind that counterweights are 20kg alone).
Attached Thumbnails
Click for full-size image (221417156_4100219420097915_8706680783123967635_n.jpg)
155.4 KB134 views
Click for full-size image (221614706_571432240681943_8886992992528450575_n.jpg)
160.6 KB112 views
Click for full-size image (221528835_1879578118878734_2592108445143609151_n.jpg)
73.2 KB116 views
Click for full-size image (223143967_2981620975443087_555464481321741913_n.jpg)
145.6 KB92 views

Last edited by BeardFace; 25-07-2021 at 02:12 PM.