View Single Post
  #1  
Old 19-10-2021, 05:51 PM
Emuhead (Andrew)
Registered User

Emuhead is offline
 
Join Date: Oct 2019
Location: Melbourne, Australia
Posts: 152
FUJI X-T2 & Star Adventurer Pro & accessories (24MP 3.9micron APS-C)

FUJI X-T2 & Star Adventurer Pro & accessories

- Fujifilm X-T2 mirrorless camera body (all original box & contents including AC charger. Fuji X-Trans sensor has 3.9 micron pixels on a 24MP APS-C sensor.
- 3 Batteries (1 genuine & 2 after market)
- 32GB Sandisk Extreme Pro 280MB/s SDHC card
- 16GB Sandisk Extreme Pro 280MB/s SDHC card (X-T2 has 2 SD card slots)
- Long eyecup
- Digital Intervalometer (brand JJC)
- William Optics T2 to Fuji X-Mount (mount your telescope directly to the X-T2)
- L-Shaped Bracket (handy to attach a guide scope to if you plan to autoguide in the future)
- Skywatcher Star Adventurer Pro
- Nikon to Fuji X-Mount T-adapter (brand: Metabones) (Attach any Nikon lens to the Fuji body https://www.metabones.com/products/details/MB_NF-X-BT1)
- Nikon to Fuji X-Mount Speed Booster/Focal Reducer Ultra (brand: Metabones) (This is a gem.. Make any full frame Nikon mount lens (including Samyang lenses with a Nikon mount) 0.71x faster! Meaning a 14mm f/2.8 Samyang lens converts to a f/2.0 lens with a true 14mm fov, as the usual aps-c crop factor is nullified. https://www.metabones.com/products/d...MB_SPNFG-X-BM2)
- Thinktank Retrospective 7 bag

Just need a lens (either FX or DX Nikon lens or Fuji) & a tripod and you’re good to go.

Paid $3777 AUD total - looking for $2000+post

Also worth noting that Fuji sensors are natively quite sensitive to Hydrogen alpha wavelength.

Will upload photos of the gear & photos taken with the setup shortly.

All in pristine condition with all original boxes.

Last edited by Emuhead; 23-10-2021 at 05:03 PM.