|
Thanks heaps again, some very good pointers there.
I have a good USB3A to USB3B cable, but not quiet in the league as the startech version, I might have to look back into them at some stage.
I am using a pegusas power box as my multi point connection and so far all good.
All good with the updated drivers, so that part is good,
I use a 240v to 12v converter, so guaranteed a solid 12v volt supply, so all good there,
I will make a note on that cooling bit and the gain settings,
Will set the dither at 1 and see how it runs, I have just recently stripped the mount all the way down and re greased, adjusted all the worm gears.
I think that is similar to how i open the programs, Stallerium, APT, PHD2
Should be all set, just got to get some clear skies to test all the theory out now.
Appreciated.
Peter.
|