Hi Raymo,
I would do the 2 star alignment first that gets the mount tracking and goto's working.
After that drift align ( meridian and low on horizon) adjust your AZ/EL bolts and when you are satisfied, park the scope, turn it off.
Turn back on and redo your 2 star alignment.
In my situation (mount fixed in the Obs) I always align the first star by hand with the clutches loose, looking through the Telrad. Then just a minor tweak with the arrow keys after locking the clutches.
This way the second star is always spot on and my SPEC and the Skywatcher internal sky model is correct.
Regards
Bill
|