|
Steel pier to suit NEQ6
Quite recently I purchased, from a fellow IISer, a small pier built to suit an NEQ6 mount. Impulsively a couple of weeks after that I purchased an EQ8 mount and now have no need for this.
The pier cost $250 to make, and the NEQ6 extension that is welded on to the top cost an additional $99. I'm asking $125.
The pier is not glamorous but it'll do the trick. One thing to note is that the bottom plate isn't totally flat as when the fins were welded on they bent it out of shape slightly.
No freight on this one, pick up only. Can be picked up after hours near Kilcoy, or in Coorparoo Tues-Fri.
Photos were lifted from the previous owner's advertisement so save me the trouble of taking my own ;-)
Last edited by codemonkey; 08-03-2015 at 07:18 PM.
|