Gday Shane
Quote:
|
Andrew, I was thinking of letting it do more than one round, for the reasons you mentioned
|
Initially, the longer the better. I always suggest people use several hours in one run if they can. If you use Metaguide, PHD2 or PEMPro to record the unguided PEC Off data, there are several apps that allow you to analyse the data, and also overlay it. The overlay mode is really interesting at showing how "non periodic" the data really can be.
Also, after doing the PEC training, you can use my PEC editor to look at how well the PEC training went, by comparing the model in the mount against the external PHD/PEMPro data
Quote:
|
I'm pretty sure the Tune Up version isn't replacement gears.
|
Correct, but when you mentioned "insert", i suspected you meant the gears as well.
Quote:
|
I'm only planning 30-60 second stackables,
|
You should get that guided without too much trouble, but what you need to see is how rough is your PE data, and more importantly, how rapidly does it change. ie some spots may work well, and others you wont keep up. I have seen data from nearly 100 LX200 mounts and every one is different
Andrew