FUJI X-T2 & Star Adventurer Pro & accessories
- Fujifilm X-T2 mirrorless camera body (all original box & contents including AC charger. Fuji X-Trans sensor has 3.9 micron pixels on a 24MP APS-C sensor.
- 3 Batteries (1 genuine & 2 after market)
- 32GB Sandisk Extreme Pro 280MB/s SDHC card
- 16GB Sandisk Extreme Pro 280MB/s SDHC card (X-T2 has 2 SD card slots)
- Long eyecup
- Digital Intervalometer (brand JJC)
- William Optics T2 to Fuji X-Mount (mount your telescope directly to the X-T2)
- L-Shaped Bracket (handy to attach a guide scope to if you plan to autoguide in the future)
- Skywatcher Star Adventurer Pro
- Nikon to Fuji X-Mount T-adapter (brand: Metabones) (Attach any Nikon lens to the Fuji body
https://www.metabones.com/products/details/MB_NF-X-BT1)
- Nikon to Fuji X-Mount Speed Booster/Focal Reducer Ultra (brand: Metabones) (This is a gem.. Make any full frame Nikon mount lens (including Samyang lenses with a Nikon mount) 0.71x faster! Meaning a 14mm f/2.8 Samyang lens converts to a f/2.0 lens with a true 14mm fov, as the usual aps-c crop factor is nullified.
https://www.metabones.com/products/d...MB_SPNFG-X-BM2)
- Thinktank Retrospective 7 bag
Just need a lens (either FX or DX Nikon lens or Fuji) & a tripod and you’re good to go.
Paid $3777 AUD total - looking for
$2000+post
Also worth noting that Fuji sensors are natively quite sensitive to Hydrogen alpha wavelength.
Will upload photos of the gear & photos taken with the setup shortly.
All in pristine condition with all original boxes.