[gregbradley]

Originally Posted by bojan

I used hanging door rails from Bunnings (Richmond 60mm 3962607).. not sure if they are still available in that size (60mm).
https://www.iceinspace.com.au/forum/...1&postcount=40
Something similar was supplied by Robot Trading, but more expensive.

Originally Posted by iborg

Hi


Greg, for a flat roof, Bojan's solution looks excellent. I am contemplating using one of the Stilla wooden sheds.


For this, I am thinking of using sliding gate track directly on the walls, and recessed wheels.


By putting an extra frame of pine under the roof section, I think the wheels can be rebated (?) into the frame, leaving only a small gap, by eye, <15mm.



Philip

That rail is very good. The wheel is potentially good. Any suggestion about how you mount the wheel which has the side timber beam sitting above the wheel frame?

Like you said it would need another timber beam on either side of the wheel to attach it to the bottom of the side beams of the roof and still be able to rotate.

These would work and would attach directly to the underside beam of the roof frame (in my case a steel square section about 100 x 50 in 3mm steel):

https://www.kogan.com/au/buy/wholesa...=Ad+group+%231

Greg.