View Single Post
  #9  
Old 28-04-2013, 09:01 AM
Garbz (Chris)
Registered User

Garbz is offline
 
Join Date: May 2012
Location: Brisbane
Posts: 644
On the QHY10 it's about 20mm from focal plane to front of the camera. I'm still someone perplexed as the ST-237 mounts directly to the front meaning you'll definitely be more than 10mm out as it only has a 16mm spacing between the camera thread and the focal plane as mentioned above.

What I may do it see if I can get a rough picture using a homemade spacer, or simply a steady hand and then if it works get a complete set of T-thread spacers.

And if it doesn't work, throw it in the bin and buy an ED-80
Reply With Quote