Thread: Mount Upgrade
View Single Post
  #31  
Old 30-03-2019, 06:33 PM
Spartacus's Avatar
Spartacus
Registered User

Spartacus is offline
 
Join Date: Aug 2007
Location: Brisbane, Australia
Posts: 56
Hi Chris, just noticed this thread, must have missed it before in Feb 2018. Good choice on the CEM120. It should do everything you want but is a bit heavy compared to equivalent AP mounts. Great value.
On a different note (and the main reason for posting) if you are still looking for an Astrophysics mount I can at least confirm that (AP1100) it works well with KStars/Indi/EKOS. Using the Indi Astrophysics experimental driver I had no problems with connecting and using the mount with Indi/EKOS. The only quirky thing was that it insisted on parking with the DEC at 90 degrees to the usual pole pointing park (Park 3). I just had to accept it and set up at this position which is easy as there are alignment marks for this position.
So if you do get a Mach 1 or AP 900 to complement your CEM120 etc your Linux set up will work well.
I have no experience with the CEM120 and linux (KStars) but driver support is there and lots of help on line in the INDI support forums.
Cheers
Mike
Reply With Quote