Quote:
Originally Posted by garymck
In the end, that is what I did. I found that the missing device drivers in the windows install could be picked up by searching the original drive using the update drivers options in device manager.
Now works very well.
All I have to do is work out a cable to power it from the same 12 volt supply I run the mount and camera from.....
cheers
Gary
|
I made my own - If you get a 'PD' USBC cable they have two thicker red and black wires that are designed to take 5A of power. I just connected them up to my 12V power supply and it worked fine. I use Anderson connectors for everything.