Thread: Diy oag-onag
View Single Post
  #8  
Old 31-07-2021, 08:41 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,932
First step: machined fitting between SCT and box.
It is actually M39x1 mm adapter (accessory from my MTO 1000A, I modified it long time ago, now it is reused again).
On this goes 39 => 42 adapter ring (2$ from ebay.. for that price not worth the effort to machine a new one).
All this will go into M42 x 1 mm thread on Jaycar box lid (I need to go and buy one now).

Threads are done, now I can attach the spacers for camera.

63.15 mm may not be enough (for FR) but previously mentioned 1 => 0.75 mm converter may do the job.


Also, I have to think how to attach guiding camera (Logitech 4000 Pro), this will require a bit of tinkering.
Attached Thumbnails
Click for full-size image (DSC_0888.jpg)
200.1 KB35 views
Click for full-size image (DSC_0890.jpg)
200.1 KB33 views
Click for full-size image (DSC_0891.jpg)
199.9 KB44 views
Click for full-size image (DSC_0892.jpg)
200.7 KB39 views
Click for full-size image (DSC_0893.jpg)
202.3 KB57 views

Last edited by bojan; 31-07-2021 at 02:02 PM.
Reply With Quote