I am not expert by any means and this could be incorrect,
But looking at those images, it appears that phd2 is sending quiet a lot of guiding commands to the mount, now this may be normal for this mount, i am not sure, but generally on mine AZ/EQ6 i don't get any where near this many command signals.
May be worth while setting up a brand new profile in phd2 to see if that helps,
Also possibly that the mount is binding, as if the backlash is too tight.
A tad odd having two faults though.
Just try one thing at a time though otherwise it will be hard to find out what the culprit was.
|