[PaulSthcoast (Paul)]

Hi Jim.

You can connect your mount to the Asi Air via an EQ Mod cable.

Unplug the handset, plug EQ Mod cable into the handset socket
and directly into the Asi Air.

Open your app and select EQ Mod mount in the mount icon
drop box, and select connect at 9600 baud

Remember to power up the mount when you open the app.

I always press the 'sync to mount' function and the use the
'return to home' function before slewing to a target.

If the mount does not stay in the home or park position
after that process, simply loosen the mounts clutches,
manually return it to the home/park position and use
'sync to mount ' and 'return to home' functions again.

Don't forget to also select your preferred tracking via
the slide button.

You may need to scroll down through the page to
locate these functions as they are close to the bottom
of the app mount page

Then mount your hand controller in a nice glass case
on the wall with "break glass in case of emergency "
painted across the front !!

Hope this helps ?

Paul.