Quote:
Originally Posted by The_bluester
One thing to try would be to disable the guiding output in PHD2 and then select a star and let it run, see what the mount is doing with no guide inputs over a couple of worm cycles. At least that way you should get a reasonable idea if it is a mount issue or something like PHD2 settings.
|
Paul,
Isn’t using the Guiding Assistant in PHD2, the same thing ?
Once selected it disables the guiding and records the motion of the mount in relation to the guide Star ( allow a few minutes ) then it gives you a full diagnostic result and recommendations
I used it a couple of times years ago when I had a HEQ5 mount that had a few issues
Cheers
Martin
PS: thankfully I’ve never had to use the Guiding Assistant again as both my EQ6-R pro mounts guide beautifully after a bit of fine tuning ( worm and drive belt adjustments )