Quote:
Originally Posted by Terry B
Very good. Make sure the orientation of the guider is set to make corrections in N/S or E/W direction only rather than at a diagonal.
|
Thanks Terry-may be all the pieces are falling into place,You mention 'rather than at a diagonal' and only a n/s or e/w correction,I am unfamilar with that setting in PHD AG.
From the sound of it,it may be on the diagonal,as I hear the AG 'shunting' a fair bit.And looking at image two suggests 4 different directions of movement?
Anyhow-maybe it could be a not so large issue that will warrant sending mount away or getting a AG side by side plate.
Clive,the plate G scope is on is 9 mm thick aluminium.but still may have flex that could be apart of issues.
Also,will look into voltage I can operate this SS2K at,it may be it would function better at higher voltage.
Thanks all for you helpful suggestions,Chris