The only reducer / corrector for newts I can recall was made in Germany by Keller and was very expensive and only covered a CCD chip like an ST10 or ST8 but would make your scope work at ( I think ) F3
The main thing you will need is a coma corrector , the televue on slows the scope by 15% but the Baader will keep it at F4.8 and should work well.
Note that they both need some "in focus " room.
It would be good to here how you go , I have a Servo Cat on the 24" but have never tried imaging with it.
Good Luck
Zane
|