View Single Post
  #6  
Old 06-01-2022, 01:12 PM
floyd_2's Avatar
floyd_2 (Dean)
Registered User

floyd_2 is offline
 
Join Date: Dec 2009
Location: Cecil Hills (Sydney)
Posts: 420
COM4 will be the one - more so because it's using a Prolific chip and only appears when you're plugged in. Is that the port that you checked in device manager as being set at 9600 baud?

Having checked that, it seems like the topic might be a little more involved than it seems to be at face value. Take a read here to see if it helps: https://stargazerslounge.com/topic/1...200-telescope/

It's been too long for me to remember exactly how I had my LX200 GPS connected to a PC. I had one back when they were new See if the above link helps. It goes through quite a few steps to try to nail it down.
Reply With Quote