Quote:
Originally Posted by Merlin66
Hmmmm
You seem to have moved away from the direct camera>guide port on mount using the ST-4 option....why?
The serial/ usb and the original upgrade cable will go to the handcontroller.
The only cable that goes to the guide port on the mount is the ST-4 guider cable.
|
Hi Merlin
Not matter what I did (several programs:Metaguide, PHD 1 and 3, maxim) the mount would not respond at all. I'm going to try USB, Serial and hand controller route. I think I need an ascom driver for the EQ5Pro GOTO now.