[Kunama]

Originally Posted by GrahamL

heres the lens assembly for one afaik

http://www.astrosurf.com/re/eyepieces_data.jpg

I"ve only pulled a few eypeices apart , though one was a zeiss with a paint flek above the baffle , simple design but still a pricey piece to be messing with .

When you work out the internal lay out you may have to sit the lens stack on a secured small piece of pvc tube ,so as you can insert the assembly in the barrel in one go, its very important you don't cock a lens or spacer in the barrel as it may never come out .

Once all clean a dry ,I find the best place to do this is in a dry bathroom, as theres little dust and crap floating round in the air , and if you shut the door none can hear you cry if it all goes wrong

good luck and take your time