View Single Post
  #3  
Old 30-06-2013, 01:10 PM
pvelez's Avatar
pvelez (Pete)
Registered User

pvelez is offline
 
Join Date: Aug 2006
Location: Sydney
Posts: 1,250
Mark

I had the same question a few months back. The other issue I found with the SB manual is that it doesn't indicated which side of the mount you need to be facing ie on the counterweight side or the control panel side.

I would do a 25 point run and shift it half the direction indicated. If it increased the error then I'd switch it the other way.

Trial and error is time consuming but I found it the best way. Remember also to apply the Supermodel before checking the PA - I found the recommendations for shifting the mount differed depending on whether or not I applied the Supermodel

Pete
Reply With Quote