|
Popping up like mushrooms. Note the 2x2.5kg weights on top to achieve balance.
EQMOD can talk to the mount using PC-direct. ie via the aux port on the handset with pc-direct selected.
EQMOD hangs on connect using my homebrew 3.3v bluetooth device direct connected to the mount, no handset.
The Unified Celestron driver set to skywatcher works with the handset in normal mode, via the aux port. ie: not pc-direct mode.
I need a 9pin female to make an adapter for my eq6 eq-dir device, but I doubt it will work anyway.
Last edited by Tandum; 12-06-2013 at 02:42 PM.
|