|
Wall height was a dilemma. I ended up with 1.8m high walls with a door height opening of 1.7m (to allow for the track).
My roof clearance on the inside is in the order of 2m. The main driver was that I wanted the control room roof to be at 1.9m. So to clear its frame the roof cross members were higher than that. The apex of the roof is at 2.4m.
But in regards to the panels, I ordered 1.85m panels so that I could overlap the concrete slab - I didn't want any water to get in. $6 sheets sounds good though. I would make use of them and then work out a way of adding roof clearance.
|