|
Section 9.2
PC Direct Mode is a special mode for the SynScan hand control to work with a PC. Under this mode, the SynScan hand control still uses the same hardware connection as described in Section 9.1, but the SynScan hand control becomes a repeater between the PC and the motor controller in the telescope mount. The application running on the PC controls the motor controller directly.
Currently, the PC direct mode is mainly used to update the motor controller’s firmware.
•
Access the menu “Utility Func. \ PC Direct Mode” and press the ENTER key. The screen will display “PC Direct Mode\Press ESC to exit”.
•
Press and hold the ESC key more than 1 second to exit PC Direct Mode.
•
Users can still use the direction keys to move the telescope mount.
This answers my EQMod question!
|