My laser collimator arrived today and I was watching a tutorial on how to properly collimate the telescope. The red dot was just outside the circle on the primary mirror so I adjusted it to be in the dot then aligned the primary mirror according to the red dot in the collimator.
I found a picture online to explain the problem I am now having (pic below).
http://i25.tinypic.com/2ep340g.png
The black section on that diagram, that is exactly what mine looks like when I look into the focuser. It looked like this before collimation and after I collimated it.
Is my scope properly collimated or is there something wrong with it?
Thanks!