Quote:
Originally Posted by Lester
I found a battery inside the unit and removed it and put it back in, without any change to the motor lag message. The battery is marked 3 volts and it is 2.8, don't know if that should make much difference as I presume it is just a memory powering battery.
|
Change the battery anyway.
Swap the motors around. Assuming the dec motor was not a problem, you would expect the Lag message to crop up on the dec axis. But if it shows up on RA still, that would suggest the problem was in the control box and not the motor.
I run my Titan t 18 VDC and it loves it. Might be worth pumping up the voltage - even to 15.
Peter