View Single Post
  #7  
Old 31-03-2013, 05:47 PM
MikeAU85
Registered User

MikeAU85 is offline
 
Join Date: Aug 2012
Posts: 3
A few more pics!

The first picture is fairly obvious... We've started to apply plate to the top to cover up a few holes, still need to do the other side and one more bit on the left side.

The second picture shows the desk on the left hand side of the trailer which has a fold up desk leaving storage underneath for sleeping equipment. If you look directly above the desk you can see the light defuser, each desk has red LED strip lighting above it which can be controlled via the main switch panel (Pic 3). We also left the chair in that came with the ambulance body which can flip the other way and fold down to make a bed. Store panels can be seen above too. The windows at each side of the trailer have 2 pieces of tinted perspex with a pair of blinds inside them so can be closed during the night.

The third picture shows the main switch panel with the 12 bus bars and most of the wiring for the trailer. Each side of the trailer also has 2 ethernet ports and a 12v cigarette lighter socket for accessories. The right side also has 2 USB ports mounted on the wall to copy the photos onto a USB stick when we're done, the PC will be mounted under a desk so it will not be that easy to get to.

The forth picture shows the front of the trailer with the new chassis which we had made up.
Attached Thumbnails
Click for full-size image (Photo 1-01-06 12 00 20 AM.JPG)
158.1 KB69 views
Click for full-size image (Photo 1-01-06 12 01 31 AM.JPG)
135.6 KB75 views
Click for full-size image (Photo 1-01-06 12 02 34 AM.JPG)
147.4 KB70 views
Click for full-size image (Photo 1-01-06 12 03 52 AM.JPG)
151.6 KB71 views
Reply With Quote