|
Hmm tried again at getting the 600D to work, but still no-go. I didn't go and disassemble the camera all the way until taking the sensor out, I just removed all the ribbon cables and cleaned them with a isopropyl wipe and reinserted. Also had a look at the battery switch but I didn't see anything wrong with it.
One issue I might've caused was I stripped one of the grounding screws for the sensor the first time around, and I had to drill it out to remove it. I managed to save the thread and replaced the busted screw with a small one from the outside casing. I can't see it being to much of a problem as the strap is fully seated.
Not really sure what more I can do, any ideas??
Below is a pic taken from ghonis showing the screw I buggered.
Cheers
|