|
Argo Navis Stalk
Well here is my latest bit of handiwork. A bit of 25mm Aluminium tube, the a bit of 25mm dowell that I reduce in diameter for the first couple of inches and inserted and held in place with screws. Drilled a 31/64" hole in the top, filled with araldite then drppoed in a 1/4" bolt upside down with a couple of nuts to make it snug. This enabled me to attach a cheap ball head which then attached to the cradle for the AN unit. Attached to the rocker with a couple of saddle clamps and a right angle bracket.
Easy!
Malcolm
|