Thread: [SOLD] Eyepiece turret
View Single Post
  #1  
Old 20-01-2013, 11:25 AM
ubique (Hugh)
Registered User

ubique is offline
 
Join Date: Aug 2008
Location: Brisbane
Posts: 188
Eyepiece turret

EYEPIECE TURRET
This turret that will hold SIX eyepieces, either 2 inch eyepieces or 1.25 inch eyepieces with the appropriate reducer (not supplied) or a mixture of both.
The diagonal mirror is 70mm and is 1/10 Wave with Enhanced Coatings. The turret rotates easily and click stops into place via a spring loaded ball bearing at each eyepiece position, it can be further locked into place by a thumbscrew.
This turret easily holds six Pentax XW eyepieces (pictured) which are larger and heavier than most.
If you are a visual observer this turret is ideal for increasing your visual pleasure, all your eyepieces are loaded and ready to use, no more fumbling in the dark to change an eyepiece they are ready to click into place in whatever combination you desire.
This turret has been milled from solid aluminum and anodized in a matt finish.

EYEPIECES AND TELESCOPE PICTURED ARE NOT INCLUDED.
PRICE $450.00 posted, or if you have anything to swap I may be interested. I am looking for a 2inch motorised filter wheel.
PM me if you are interested.
Attached Thumbnails
Click for full-size image (Turret 2 inch 1.jpg)
80.4 KB29 views
Click for full-size image (Turret 2 inch 2.jpg)
76.9 KB23 views
Click for full-size image (Turret 2 inch 3.jpg)
73.3 KB21 views
Click for full-size image (Turret 2 inch 4.jpg)
62.8 KB21 views
Click for full-size image (Turret 2 inch 5.jpg)
110.7 KB34 views
Click for full-size image (Turret 2 inch 6.jpg)
85.9 KB28 views
Click for full-size image (Turret 2 inch 7.jpg)
53.5 KB29 views

Last edited by ubique; 20-01-2013 at 07:46 PM.