Quote:
Originally Posted by LewisM
I am going to try a new guider interface cable tonight - I take it they are just standard "phone" cable, and not reversed etc?
Already tried a new USB to the guider from computer.
I will see if I have the right cable in my stash, and if so, I may run EQMOD too.
|
They are not the standard 4 cable RJ11 cable that most phones use.
The cable has 6 pins in a RJ12 connector. Whether it is reversed depends on the guider. My QHY5 used a reversed cable compared to my STi.
I found it easiest to make my own. The crimping tool is
cheap and easy to use. Plugs can be bought at Jaycar or
on line.