Thread: Lunt scope woes
View Single Post
  #3  
Old 18-01-2013, 10:54 PM
deadsimple's Avatar
deadsimple (Ash)
Registered User

deadsimple is offline
 
Join Date: Sep 2008
Location: Brisbane
Posts: 180
Thanks for the reply, I appreciate it.

Ignoring the blocking diagonal for now, I've been inspecting the scope some more and pointed a torch down the glass at the front of the tube. I can see dust and two half fingerprints or scruff marks (hard to tell which) on the front of the etalon at the top and top-right edges.

I had to do some aggressive photography with the 7D and a torch to capture shots of the fingerprints. Please see attached photos from various angles. The marks are a bit more exaggerated than how you see them with the naked eye and a torch (and keep in mind none of this is visible without a torch), but it gets the point across.

Which leads me to consider whether my expectations are a little high and this is typical quality that I should deal with. Is it too much to expect a $2500+ scope to be in pristine condition? Just wanted to get some opinions before I contact the supplier.
Attached Thumbnails
Click for full-size image (front_a.jpg)
149.8 KB80 views
Click for full-size image (front_b.jpg)
128.4 KB74 views
Click for full-size image (front_c.jpg)
129.8 KB73 views
Reply With Quote