|
Thanks both John and Paul.....Yes I have no trouble cold starting...I have done it approx 20 times now.
I would rather get all this sorted out now and then I would have to do the cold start and remodeling anyway....that does not take long
The idea is to have everything set up and working properly then do all your modelling.....sounds logical.
I will do what you said and slew over 180 degrees then loosen the clutch and cover the other 180degrees..that sounds simple....
I have a fealing that the Dec axis which I tightened may be a bit tight as it has a higher pitch to that of the RA axis....will test and adjust today.
Thanks guys.
|