The same, a small round builders bubble level on the lens holder plate seems to be ok to level it, I use one star alignment for viewing or two star alignment when imaging with a DSLR and Orion Starshoot tracking on a Losmandy plate or just the C11 with DSLR attached. I am over the weight limit but expecting a extension shaft (Thanks to Trevor) for the HEQ5 which hopefully will allow using the Hyperion lenes with the DSLR (60Da) The C11 plus DSLR 13.6kg + counter weights 18.5 kg = 32.1kg The HEQ5 came with two 5kg weights It wouldn't take much to add 5kg of scope and camera so even the HEQ6 is under the weight recommended unless I'm reading the specs wrong. Bottom line I like the mount it handles what I throw at it...One word of warning, my hand controller failed, it was a very humid night but still I'd expect better, that said I have read some people put there controllers in a plastic glad bag, I think I was unlucky it is rare worse case the board goes in the mount which can be easily replaced.
I have gone on but it's all good, a great mount easy to use takes my abuse without complaining in my opinion
