[ubique (Hugh)]

EYEPIECE TURRET
This is a custom made eyepiece turret that will hold SIX eyepieces, either 2 inch eyepieces or 1.25 inch eyepieces with the appropriate reducer (not supplied) or a mixture of both plus three filters.

Each eyepiece is locked in place by two thumbscrews so your valuable eyepiece doesn’t fall out. The diagonal mirror is 65mm and is made of the highest quality Pyrex, 1/10 Wave with Enhanced Coatings. The turret rotates easily and click stops into place via a spring loaded ball bearing at each eyepiece position, it can be further locked into place by a thumbscrew.

A unique feature of this turret is the three filter slide; other highly priced American made Hex Turrets only have the ability to hold one filter at a time. This turret with its unique sliding filter holder allows the use of up to three 2 inch filters making it easier and more convenient to view the planets or nebulas with different filters simply by sliding the filter into place. The sliding filter holder click stops into position by a spring loaded ball bearing so you know the filter is centered.

This turret easily holds six Pentax XW eyepieces (pictured) which are larger and heavier than most.

If you are a visual observer this turret is ideal for increasing your visual pleasure, all your eyepieces and filters are loaded and ready to use, no more fumbling in the dark to change an eyepiece or filter they are ready to click into place in whatever combination you desire.

WEIGHT, if you are concerned about weight I have found that the Astrozap dew shield on my Meade SCT balances out the extra weight of the turret and eyepieces perfectly.

This turret has been milled from solid aluminum and anodized in blue.

EYEPIECES, FILTERS AND TELESCOPE PICTURED ARE NOT INCLUDED.

PRICE REDUCED TO $750 POSTED.

PRICE $950.00 posted, or if you have anything to swap I may be interested.
PM me if you are interested.