|
I have an neq6 and upgraded the firmware to the 3.30 b29
I gave the polar realignment option a go. i alligned manually first getting as close to scp as i could with the polar scope. (hard when perth is directly south of me)
i first did a 3 star align, once that is done it shows me how far out it thinks my polar align is which is neat. it tells me im about half a degree out az an el
next i selected the polar realign option. It slews close to Alpha cent and I centre alpha cent with the handset as it asks me to then hit enter.
The neq then slews just off and asks me to adjust the bolts. ( at this point i notice that it is wanting me to adjust away from scp the amount its out.
I adjust it anyway, do a 3 star alignment again and it tells me im now about 1 degree out.
i repeat the process and then it tells me im 2 degrees out.
rinse repeat and i get 4 -5 deg out.
dont think im doing anything wrong with it. but seems it still has beta bugs although others have reported its fine.
anyone else had dealings with 3.30 in southern hemisphere
|