|
I thought it would have used the co-ords you enter on the same page, doesn't look like it. I set all the others (N/S, E/W, U/D) to zero to try and see what was going on. East and west at 30degrees Alt where fine but south and north where not, the gem offset was reversed. I suppose poth is setup for the mount to be pointing north not south. If that's the case then N/S offset might need to be reversed as well so the dome turns the right way.
It got really bad last night when I swapped out the fs102 for the rc8 with a guider on top. That added about 300mm to the offset.
Last edited by Tandum; 29-09-2012 at 01:09 PM.
|