Quote:
Originally Posted by TrevorW
With a GSO RC you only adjust the secondary the primary is fixed\\
|
Actually that is not true.
The primary is not fixed there are adjustment screws for primary collimation. It is recommended that you don't touch those screws unless a) you know what your doing and b) you have a tak collimation scope.
If you have the former and the tak scope then it is quite simple to adjust the primary.
However, most times the secondary is the only set of screws that will need adjustment.
Go to
http://www.rcopticalsystems.com/support/resources.html and get Ken Crawfords video.