Quote:
Originally Posted by ozstockman
If you are good with vector graphic software you can draw the one you need and I can cut it out of 3mm thick MDF or acrylic with a laser.
If it does not have to support the legs and just for holding eyepieces both MDF and acrylic will work.
|
The spreader is a major part of the rigidity of the tripod and needs to be sustantial. The original is cast aliminium with strengthening ribs making its developed thickness about 35mm. Acrylic or MDF would not be strong enough under 25mm thick.
If I was making one I would fabricate it out of 4mm steel plate with a central tube and strenghthening ribs welded on. I would need steel because I don't have aluminium welding equipment.
Barry
Barry