|
Dave,
That new version is working well. One small thing I noticed is if you click any of the focus control buttons on the client it resets the colour on the filter "go" buttons back to grey so you can't see which filter you last selected. Was this intentional? The movement of the stepper is still correct when selecting a different filter despite this.
I also had a couple of thoughts regarding the client tab layout:
I think the ref position controls would be better on the focus control page as this is the page you are most likely to be on when the ref position is set. Also the reference position will most likely be the lum filter and the go button for this filter is already on the filter position tab.
Once the ref position is set I will most likely switch to and stay on the filter position tab. It would therefore be good to have the temperature comp controls and temp display on the filter positions tab. Finally I think it would be nice to have the absolute position indication replicated on the filter position tab so you can see what's going on.
Just my thoughts - please feel free to ignore if you've heard enough bright ideas from me!
Peter
|