Hi Ross.
To have a automatic meridian flip you have to click the checkbox.
I think that the East/West is confusing because the Americans are pointing to the North and we are pointing to the South, so the Americans are pointing ass about
If we are standing behind the scope and looking South, the East is on the right hand side, Northern observers are pointing North with East on the Left hand side
Pretty confusing
The mount will stop tracking when reaching the limit and should beep to let you know it stopped.
The tech group is here -->>
http://tech.groups.yahoo.com/group/Gemini-II/
Hope this helps a bit.
Cheers,
Martin.
Quote:
Originally Posted by Ross G
Hi Darrin,
Thank you for the sites.
With reference to the East and West limits on the hand controller, does the East limit, for example, mean when the scope is in the east? I know the question sounds "dumb", but after having the latest firmware loaded yesterday, I found I had to reverse my East/West limit settings on the hand controller for the mount to stop at the correct points and not crash. Also, in your post your mentioned that your mount stopped tracking when it reached it's East limit.
Thanks.
Ross.
|