Quote:
|
Originally Posted by barees63
Maybe I should, the other day I noticed the 4 small screws that hold the little silver plate underneath were almost dropping out, I tightened them and it's been much stiffer since then, but if I loosen them I'll lose them..
|
Those screws has plenty enough thread on them to adjust the tension without fear of loosing them.
If after a cleanout and adjust of the r&p you're still not happy ( I wasnt), I recommend you try a crayford. I have the gso one and im happy with it. It fits the same mounting holes as the standard r&p.
In short I would avoid complexities like electric focusers as it detracts from the main beauty of using a dob, simplicity and freedom from wiring and gadgetry
