Quote:
Originally Posted by alistairsam
Hi Dan
Which low profile focuser were you looking at? Mounting limitations vary.
|
I had been looking at a couple on Bintel - but they seem to have disappeared.
Quote:
|
With the 130mm, you could move the mirror up a bit with longer bolts and springs rather than fit a large focuser, else you'd have to make an adaptor plate or fill the gap but key is to make sure the focuser is perpendicular.
|
There's only about 1cm before the casing around the end of the tube - and it sounds like moving the secondary would be quite a bit of work. It couldn't be that hard to make an adapter plate could it?