Quote:
Originally Posted by risingmoon
Hi Peter
The eye piece is screwed into a star diagonal 1/4" and the eye piece its self is pushed right into the star diagonal with two screws each side to keep it tight. It goes in by 2cm.
I can take a photo of the focuser end of the scope with an eyepiece in it but why?
|
If we could see a photo of the scope all set up, we could see if anything obvious is wrong.
You can try removing the star diagonal and popping the eyepiece straight into the back of the scope, and see if you can achieve focus.
The focuser does go around a *lot* of times, so keep winding until it stops or comes into focus
