Wireless set up
First connect to device over wired setup at IP
http://192.168.0.126:81/monitor2.htm# (browser dependent)
Select setup (the cog / gear wheel at the box of the control box) takes you to
http://192.168.0.126:81/admin2.htm
Select tab Wireless LAN Set-up
Note you have to search for wireless connections twice, then select the one you want (and I suppose disconnect the cat 5/6 cable), select use wireless LAN and apply settings and wait 28 seconds for device to restart.
Page 21 of the 4.5 MB manual covers it:
http://www.easyntech.com/download/Ea...EE1103A%29.zip
2.4.3Wireless LAN Settings
Click the Scan button (at least two times),select your wifi SSID, and write in your wifi’s password. [IMG]file:///C:/Users/Matthew/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg[/IMG]
ADSL Settings ( pls don’t use it ,if you use routers)
When connected to the Internet through ADSL directly ,you can enter the ADSL username
and password obtained from ISP.
[IMG]file:///C:/Users/Matthew/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg[/IMG]
Upnp Settings: If you have done the port forwarding in the routers, you need not care about it.
[IMG]file:///C:/Users/Matthew/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg[/IMG]
DDNS Service: The system support protocols from some DDNS providers,and our own ddns ( built-in)..
User and Password: the user name and password used when applying for the domain name .(if use our Built-in ddns, and you can find the ddns user and password from the label of ip camera)
DDNS or Proxy Server: If you access the DDNS host through a proxy, you should input the Proxy IP.(if use our Built-in ddns,it’s should be user.easyn.hk)
DDNS or Proxy Port: Proxy Port.(if use our Built-in ddns, the port should be 808 or 80)
[IMG]file:///C:/Users/Matthew/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg[/IMG]