Quote:
Originally Posted by multiweb
Cool - I already have a USB to serial plugged into the RS-232 port. That's the way I connect the GCC and the Gemini.net ascom driver on COM4. So setting COM4 in stellarium will work. That simple?
|
Hi Marc
If you already have ASCOM you can also use Stellarium scope (Not part of Stellarium). But ASCOM is not necessary for a direct connection Stellarium.
You can use any port up to at least COM16 but depending on the version of stellarium the window may not scroll past COM 4. Just type the number in the window.
Some programs can only use COM 1 or COM 2 so you may need to re-configure the Port to COM 1 or 2
However it looks like you already have the cable connected for GCC using COM 4, so Just run Stellarium and nominate COM 4. Oh! I forgot, Make sure that the Telescope drive module is configured from the plug in window to run at start up.
Barry