Quote:
Originally Posted by graham.hobart
Interesting -and I did have some issues with my EQ 6 and moisture a while back. But these last few sessions I have been using a CGEM mount with SSAG plugged directly into the mount & laptop. I don't know whether the guide pulses are sent via the hand box that way.
It seems that once it is calibrated, it then gets stuck on one direction and at a speed much faster than normal guiding (handbox speed guide set at 0.5 sideral)
Will try and dry it out in side anyway and see if it helps.
Cheers
Graham
|
I don't know what the problem is but if you plug the guider directly into the mount, the hand controller has no action on the guiding. Check the usb cable is making good contact with the guider and can't move. This caused problems with my guider in the past. I hold the cables with an elastic band around the guider to stop any traction on the cable.