|
Gday Jennifer
I suspect you have loaded the "GPS Setup" portion of the patch then.
( You can check this if required using my PEC editor )
As i noted earlier, we have integrated the external StarGPS unit into the underlying Autostar code, to get a more efficient method of working.
With that bit of patch loaded, the handbox will firstly look for a StarGPS unit plugged into the handbox serial port. If it doesnt find one, it declares no GPS, then it reverts to normal processing.
In your case, this means it tries for the integrated Meade GPS unit if fitted, and if that times out, it reverts to the manual Hbx entry.
If your scope fixed OK and the date/time after fix was correct,
then all is working as it should.
Andrew
|