View Single Post
  #25  
Old 17-10-2011, 05:35 PM
Zincberg (Andrew)
Registered User

Zincberg is offline
 
Join Date: Nov 2010
Location: Wyoming, NSW
Posts: 114
Quote:
Originally Posted by AndrewJ View Post
Gday Andrew



But what firmware "was" loaded. That will tell if the new firmware will have fixed some of the "goto" type problems.
Re the DEC axle/motor, does it actually move up AND down ( without making horrible noises ) when you use the slew keys at say speed 3????
If so, then the system is basically working.

Andrew
Yeah, im not sure what firmware it was, I talked to you a while ago in yahoo groups about it...and I did the upgrade then, basically it fixed my horrible Periodic error I had (as well as ANOTHER new RA motor.
Yes, the scope was moving up and down at speed 3.. but barely. there was a lot of "lag" I would say I had to hold down the button for 2 seconds before it would actually move... which I am guessing is why PHD wasnt guiding N/S.. the message was sent, the scope was trying to do something... but there just wasnt enough time to make it move.
Anyway... its done now... Ill hang onto the forks.. in case things go pear shaped with the eq6, but Ill definately sell the wedge.
Reply With Quote